Cisco 7905 사용자 설명서 - 페이지 7

{카테고리_이름} Cisco 7905에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7905 8 페이지. Ip talk series
Cisco 7905에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 전화 매뉴얼 (46 페이지), 사용자 설명서 (10 페이지), 빠른 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (20 페이지), 빠른 참조 매뉴얼 (7 페이지)

Place a Call from Call History

1. Use the Navigation button to scroll through the call history list.

2. Use the Select soft key to select a phone number. The digits appear on the phone display.

3. Press the Dial soft key to dial the number as it appears on the screen.

4. To change the format of the number on the screen, press the Edit soft key to place the cursor at

the beginning of the number on display.

5. Use the keypad to enter the digits as needed. Use backspace (<<) to erase any mistakes.

6. Press the Dial soft key to place the call.

To Clear Call History

To clear all numbers in the directory histories, press the Clear soft key. This will clear all of the call history.

Deleting specific call history lists is not supported.

Adjust the Volume for the Current Call

To adjust the handset, speakerphone, or headset volume for the current call:

1. During a call, press the Up or Down Volume button.

2. Press Save to apply the new volume level to future calls.

Adjust the Ring Volume

To adjust the ringer volume, press the Up or Down Volume button while the handset is in the cradle.

Select the Ringer Type

1. Press the Settings button.

2. Press 2 for ring type or use the Navigation button to select the ring type and press Select.

3. Use the Navigation button to select the ring type. Press the Play soft key to hear samples.

4. Highlight the ring you want, and then press Select.

5. Use one of the following options:

Press Ok to select your setting, which returns you to the previous menu.

Press Cancel to exit to the previous menu without changing the setting.

Press Back to return to the main phone screen.

Adjust the Display Contrast

1. Press the Settings button.

2. Press 1 for contrast, or use Select.

3. Use Down or Up to change the contrast.

4. Use one of the following options:

Press Ok to select your contrast setting and returns you to the main directory.

Press Cancel to exit to the previous menu with changing the setting.

Press Back key to return to the main phone screen.