Siemens EXTRAKLASSE XLM 1200 사용 설명서 및 설치 지침 - 페이지 31

{카테고리_이름} Siemens EXTRAKLASSE XLM 1200에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EXTRAKLASSE XLM 1200 48 페이지.

Cleaning water

inlet strainer

Release the water pressure

in the supply hose

This is necessary if very little or no water flows into the

washing machine.

1. Turn off the water tap.

2. Turn the programme selector to any programme

(except Spin and Empty).

3. Press the Start button, and allow the programme

to run for approx. 40 seconds.

4. Turn the programme selector to Off.

5. Disconnect the hose from the water tap.

6. Clean filter with a small brush or paint brush.

7. Connect the hose.

8. Check whether water is coming out of the end of

the hose. If water is still discharged, check that the

strainer is attached properly.