Siemens SIWAMAT XL 528 사용 설명서 - 페이지 31
{카테고리_이름} Siemens SIWAMAT XL 528에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAMAT XL 528 48 페이지.
Siemens SIWAMAT XL 528에 대해서도 마찬가지입니다: 사용 설명서 및 설치 지침 (49 페이지)
페이지 인쇄
Fault
Programme does not
start.
y
y
The
" control light
flashes.
Programme does not
start.
Water does enter the
machine or detergent is
hi
d t
t i
not washed away.
not washed away.
The
" control light
J
flashes.
Detergent in chamber I is
not washed away.
Water cannot be seen in
drum.
Washing solution is not
g
completely drained. The
l l d i d Th
L
" control light flashes.
Water is flowing out from
underneath the machine.
Foam coming out of the
detergent dispenser.
The laundry was not spun
correctly.
All manuals and user guides at all-guides.com
Cause
Loading door not closed.
3
" button not pressed.
Water tap not turned on.
Supply hoses kinked or trapped.
Strainer in supply hose clogged.
A programme without Prewash was
selected.
This is not a fault.
The water lies below the visible part of the drum.
Loose debris is blocking the pump.
Fluff producing laundry was
washed. The water drainage pipe or
drain hose is blocked.
The thread of the supply hose is not
tight.
Leak in the drain hose.
To much detergent.
Large items of clothing became
entangled and could not be
distributed evenly in the drum. For
safety reasons, the high speed final
spin cycle was automatically
cancelled.
Action
Check whether laundry is trapped in
door.
Close the loading door (a click
should be heard).
3
Press the
" button.
Turn on water tap.
Eliminate the cause.
Clean the strainer
(refer to Page 28).
Select "
60 C
K
Cottons/coloureds with Prewash".
Clean the pump (refer to Page 27).
Clean the water drainage pipe
and/or drain hose.
Tighten the thread.
Replace the drain hose.
Mix 1 tablespoon of fabric softener
with ½ litre / 1 pt of water and pour
into chamber II of the detergent dis
penser.
Reduce the amount of detergent
next time.
Always load large and small items
together into the drum (see also
unbalanced load detection system).
31