Siemens Washing machine 사용 설명서 - 페이지 18

{카테고리_이름} Siemens Washing machine에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Washing machine 28 페이지. Washing machine
Siemens Washing machine에 대해서도 마찬가지입니다: 설치 및 유지 관리 지침 매뉴얼 (10 페이지), 사용 설명서 (8 페이지), 설치 지침 매뉴얼 (6 페이지), 사용 설명서 및 설치 지침 (28 페이지), 빠른 참조 지침 (2 페이지), 빠른 참조 지침 (2 페이지), 빠른 참조 지침 (2 페이지), 사용 설명서 및 설치 지침 (28 페이지), 설치 지침 매뉴얼 (6 페이지), 사용 설명서 (10 페이지), 빠른 참조 지침 (2 페이지), 사용 설명서 (10 페이지), 사용 설명서 지침 (28 페이지), 사용 설명서 (10 페이지)

페이지 인쇄

Delayed Start

By pressing the pushbutton multiple times,

start of the programme can be delayed from

1 to 19 hours.

The selection is confirmed after a few

seconds. To activate the delayed starting,

press the "Start" button.

The course of the Delayed Start is displayed

every hour from 19 hours to 1 hour, and

then every minute from 59 minutes to

1 minute. During the entire process, the

Delayed Start symbol is illuminated.

The four segments flash in succession.

After the Delayed Start time ends, the

programme starts and the remaining time

is indicated on the display panel.

Topping up laundry + changing programs

Adding or removing laundry

(not possible during spin cycle):

During the washing cycle, laundry may be added or removed.

• Press the "Start" button

• Remove or add laundry if necessary.

(*) It may be 1 to 2 minutes until the lid unlocks.

• Press the "Start" button

If a Delayed Start has been selected, the drum may be opened

at any time before the start of the programme without aborting

the programme and having to start anew.

Changing the programme

If you have chosen the wrong programme:

• Turn programme selector to "Off".

• Set programme selector to the desired

programme.

• Press " Start" if applicable.

The spin speed may be changed at

any time during the programme.

As long as they have not finished, all

options may be activated or

deactivated at any time during the

course of the programme.

the

to abort the programme.

to restart the programme.

During the course of the Delayed Start, the

settings may be changed at any time, see

section "Changing the programme".

remaining time is stopped.

function is again activated

Terminating the programme

If you would like to terminate a programme

before it is completed:

• Turn programme selector to " Off".

• Set programme selector to "Spin".

Select desired spin speed for "Spin" (but not

Rinse Stop).

• Press " Start" button.

the indicated

the remaining time

(two dots flash).