Cisco 7910 Series 시작하기 매뉴얼 - 페이지 12
{카테고리_이름} Cisco 7910 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7910 Series 34 페이지. Getting started guide
Cisco 7910 Series에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지)
페이지 인쇄
Safety Notices
Read the installation instructions before you connect the system to its power
Warning
source.
Warning
Ultimate disposal of this product should be handled according to all national
laws and regulations.
Do not work on the system or connect or disconnect cables during periods of
Warning
lightning activity.
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits
Warning
to telephone network voltage (TNV) circuits. LAN ports contain SELV circuits,
and WAN ports contain TNV circuits. Some LAN and WAN ports use RJ-45
connectors. Use caution when connecting cables.
The next warning applies when you use an external power supply.
Warning
This product relies on the building's installation for short-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.
(240 VAC, 10A international) is used on the phase conductors (all
current-carrying conductors).
The device is designed to work with TN power systems.
Warning
Getting Started with the Cisco IP Phone 7910 Series
2-2
Chapter 2
Installing the Cisco IP Phone 7910 Series
78-11443-02