Siemens WM T Series 사용 설명서 및 설치 지침 - 페이지 18

{카테고리_이름} Siemens WM T Series에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WM T Series 46 페이지.

Siemens WM T Series 사용 설명서 및 설치 지침
Positioning and connecting
en
To prevent foaming, only use
Note:
half the amount of detergent
recommended by the detergent
manufacturer.Do not use detergents
intended for woollens or delicates.
Close the detergent drawer.
7.
Start the program.
8.
Switch off the appliance once the
9.
program has finished.
Your washing machine is now ready to
use.

Transportation

E.g. when moving house
Preparatory work:
Turn off the tap.
1.
Release the water pressure in the
2.
supply hose: ~ "Filter in the water
supply blocked" on page 39
Disconnect the washing machine
3.
from the mains power supply.
Drain the remaining water: ~ "The
4.
drain pump is blocked, emergency
draining" on page 38
Detach the hoses.
5.
Empty the dispensers. ~ Page 34
6.
Caution!
Risk of damage to the appliance
caused by detergent/fabric softener
leaking from the dispensers
Leaking detergent/fabric softener
can prevent the appliance from
working correctly, e.g. due to
damage to the electronics.
Empty the dispensers before
transporting the appliance.
Fitting the transportation securing
means:
Remove the covers and keep them
1.
in a safe place.
If required, use a screwdriver.
18
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
Before switching on the appliance
again:
Notes
The transit securing devices must
be removed. ~ Page 13
To prevent unused detergent from
flowing straight into the drain during
the next wash, pour approx. 1 litre of
water into the manual dosing
compartment, select the Drain
program and start this program.