Siemens WM T Series 사용 설명서 및 설치 지침 - 페이지 31
{카테고리_이름} Siemens WM T Series에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WM T Series 46 페이지.
페이지 인쇄
a
Intelligent dosing
system
F amiliarising yourself with i-
I n t e l l i g e n t d o s i n g s y s t e m
Dos
i-Dos Intelligent dosing system
Your appliance has an intelligent dosing
system for liquid detergent and fabric
softener.
The optimum quantities of liquid
detergent and fabric softener are
dispensed automatically depending on
the programme and settings.
Automatic dosing is activated at the
factory for all the designated
programmes and it can be adjusted to
suit your requirements. The settings are
saved when the appliance is switched
off.
For programmes in which automatic
dosing is not possible, you can add
suitable detergent to the compartment
in the detergent drawer for manual
dosing.
i-Dos Detergent drawer
( ¨ dispenser for liquid detergent
0 M/¨ dispenser for fabric softener
or liquid detergent; set the
dispenser content ~ Page 32
8 Manual dosing compartment
Intelligent dosing system
Before setting up i-Dos
Follow the manufacturer's instructions
when choosing your detergent and care
product. We recommend using easy-
pour, all-purpose, universal and colour
liquid detergents for all machine-
washable, coloured items made of
cotton or synthetic fabrics.
Notes
Only use easy-pour liquid products
■
that the manufacturer recommends
adding to the detergent drawer.
When cleaning the i-Dos detergent
■
drawer, empty the dispenser
completely and clean it. ~ Page 34
Do not mix detergent and fabric
■
softener.
Do not use products containing
■
solvents, caustic agents or volatile
substances (e.g. bleach).
Do not use products that have
■
expired or are highly congealed.
Automatic dosing
The automatic dosage operates as
follows:
Switch on the appliance.
1.
A function test of the i-Dos pump unit
takes place, and this can be
detected by a brief noise in the i-Dos
detergent drawer.
Select a programme with i-Dos
2.
settings.
When the i-Dos setting for detergent
and fabric softener is active, the
corresponding symbols light up in
the display.
Start the programme.
3.
The drum rotates and, depending on
the programme selected, load
detection takes place (takes up to 2
minutes). Depending on the load
detected, the required quantities of
detergent and fabric softener (in the
last wash cycle) are then dosed,
which can be detected by a pump
noise.
en
31