Siemens WM08K060HK 사용 설명서 - 페이지 22

{카테고리_이름} Siemens WM08K060HK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WM08K060HK 36 페이지.

Faults and what to do about them.

Caution!

Water damage

Any escaping water may cause water

damage.

Do not open the washing machine door

if water can be seen through the glass.

Switch off the appliance. Disconnect

the mains plug.

Drain the detergent solution

Information on the display panel

Display

Note:

Indicator lights for status displays and/or buttons flash:

Indicator lights q

und x flash.

Indicator lights 0

und x flash.

Indicator lights 0

und q flash.

All indicator lights flash.

Cause/remedial action

Close the washing machine door properly, laundry may be caught.

Turn the water tap on fully,

■

The supply hose is kinked/trapped,

■

The water pressure is too low.

■

– Clean the filter. ~ Page 21

– If an additional water filter has been installed (depending on model)

~ Page 30, check for contaminants and clean if required ~ sepa-

rate installation and cleaning instruction for water filter.

The detergent solution pump is blocked. Clean the detergent solution

■

pump. ~ Page 20

The drain hose/waste pipe is blocked. Clean the drain hose at the siphon.

■

~ Page 21

Turn off the tap and call the after-sales service. ~ Page 24

Pull the emergency release

downwards with a tool and release.

The washing machine door can then

be opened.