Cisco 7911 빠른 시작 매뉴얼 - 페이지 23

{카테고리_이름} Cisco 7911에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7911 30 페이지. Cisco systems ip phone user manual
Cisco 7911에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (19 페이지), 사용자 설명서 (12 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (7 페이지), 사용자 설명서 (7 페이지), 매뉴얼 (2 페이지), 빠른 참조 사용 설명서 (2 페이지), 사용자 설명서 (4 페이지), 치트 시트 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄
Cisco 7911 빠른 시작 매뉴얼
11.
A new section named
window.
12.
Put a check mark below
13.
Click the
Save button.
Your VoIP phone's mobility settings are now configured with your cell phone number.
When your VoIP phone rings, your cell phone will ring too.

Add a speed dial phone number

Set up speed dial phone numbers for use with abbreviated dialing through the Cisco
Unified CM User Options website. To add a speed dial phone number, do the following:
1.
Log in to the Cisco Unified CM User Options website.
2.
Click the
User Options menu in the upper-left corner and select Device.
3.
Click the
Speed Dials button.
4.
Enter a phone number in the
5.
Enter a short description of the phone number in the
automatically entered into the ASCII Label column too.
6.
Click the
Save button.
7.
The website displays the message, "Update successful." After a moment, your
VoIP phone will be updated too; you may notice your phone's display flash briefly
as this happens.

Remove a speed dial phone number

Remove speed dial phone numbers through the Cisco Unified CM User Options website.
To remove a speed dial phone number, do the following:
1.
Log in to the Cisco Unified CM User Options website.
2.
Click the
User Options menu in the upper-left corner and select Device.
3.
Click the
Speed Dials button.
4.
Delete the phone number you want to remove from the appropriate box. It is not
necessary to delete the corresponding Label or ASCII Label.
22
Association Information appears on the left side of the
Line Association.
Number column.
Label column. This text is