Epson AP-60 - Projector Sound Solution 사용자 설명서 - 페이지 16
{카테고리_이름} Epson AP-60 - Projector Sound Solution에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AP-60 - Projector Sound Solution 28 페이지. Projector sound solution
Epson AP-60 - Projector Sound Solution에 대해서도 마찬가지입니다: 매뉴얼 (5 페이지), 설치 매뉴얼 (28 페이지), 연결 매뉴얼 (1 페이지), 부품 목록 (1 페이지), 브로셔 및 사양 (4 페이지), 제품 지원 게시판 (8 페이지)
페이지 인쇄
Adding a Second Microphone
Follow the steps below to connect a second microphone to the AP-60.
1
Check the channel selector switch on top of the pendant microphone and note what channel it's set to.
2
Set the second microphone to the opposite channel and turn it on.
3
Verify that the Mic light for the second microphone is illuminated on the AP-60. The light on the AP-60
should match the channel selected on the second microphone.
Adjusting Audio Levels
If you notice that external audio sources are louder than your voice, follow the steps below to adjust the audio to
the desired levels.
1
Adjust the Gain control wheel until the white line on the Gain control wheel is next to Up, but still visible.
2
Speak into the pendant microphone and use the volume control on your external audio sources to adjust the
volume. A good mix is when your voice is slightly louder than the external audio source.
Channel selector
Mic lights
Gain control wheel
16