Epson AP-60 - Projector Sound Solution 설치 매뉴얼 - 페이지 11
{카테고리_이름} Epson AP-60 - Projector Sound Solution에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AP-60 - Projector Sound Solution 28 페이지. Projector sound solution
Epson AP-60 - Projector Sound Solution에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 매뉴얼 (5 페이지), 연결 매뉴얼 (1 페이지), 부품 목록 (1 페이지), 브로셔 및 사양 (4 페이지), 제품 지원 게시판 (8 페이지)
페이지 인쇄
Required Tools and Hardware
The AP-60 should be installed by a professional audio/video installer or other qualified professional. To install
the system, the installer will need these tools:
•
Phillips screwdriver
•
Large adjustable wrench
•
Ladder
•
Hardware for securing the IR dome sensor and coaxial cable
Note
Depending on your ceiling construction, additional tools and hardware may be required.
Installing the IR Dome Sensor
The IR dome sensor is the first thing you'll need to install. To ensure proper audio reception, the IR dome
sensor should be positioned to have direct line of sight to most areas of the room. The IR dome sensor should
also be mounted in a location free of obstructions and away from strong light sources. When choosing a location
for the IR dome sensor, keep the following in mind:
•
Do not install the IR dome sensor or coaxial cable near power cables. This can cause unwanted audio noise
or reduce the sensitivity and range of the IR dome sensor.
•
Do not bound the coaxial cable to any other cables.
•
Do not install the IR sensor near strong light sources, such as incandescent bulbs, halogen lamps,
fluorescent lights, or a window.
•
The IR dome sensor must be mounted at least 3.28 feet (1 meter) away from fluorescent lights.
•
Do not install the IR dome sensor in a dusty environment. This can reduce the sensitivity and range of the
IR dome sensor.
•
Do not paint the cover of the IR dome sensor.
•
The use of IR remote controls of any kind can interrupt the sound or cause noise.
•
The IR dome sensor receives reflected signals from the walls, floor, and ceiling. The reception may be
reduced if the wall, floor, or ceiling colors are dark.
•
The sound may break up if the IR dome sensor is installed near a window or in a room with a lot of
windows. Apply light-colored curtains or blinds to improve the sound quality.
•
Install the IR dome sensor on a ceiling that is less than 9.8 feet (3 meters) high. If the ceiling is too high, the
IR dome sensor may not be able to receive the microphone's signal from directly under the IR dome.
11