Epson AP-60 Sound Enhancement System 제품 지원 게시판 - 페이지 3

{카테고리_이름} Epson AP-60 Sound Enhancement System에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AP-60 Sound Enhancement System 8 페이지.

1) Connect the power cable to the AP-60 unit (Power LED is solid orange) -- do not turn it

on. Verify the null modem cable is connected to the AP-60 unit RS-232c and computer RS-

232c serial ports.

When the AP-60 is in Standby Mode, hold down the Power button (black button on the

front left side of the audio control board) for at least 3 seconds or more until

the Power light LED shows blinking green—release when the Power LED is blinking green.

a) If the Power LED does not show blinking green, set the projector to standby mode

and hold down the power button again for 3 seconds or more.

b) Right-click My Computer on the PC desktop screen then click Manage.

2. Click Device Manager and expand Ports (COM & LPT). Then note the available

COM Port number. The following example shows the assigned port number as COM1.

Page 3 of 8

PSB.2010.01.001