Epson Artisan 810 Series 네트워크 설치 매뉴얼 - 페이지 33
{카테고리_이름} Epson Artisan 810 Series에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 810 Series 37 페이지. Color inkjet printer
Epson Artisan 810 Series에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (8 페이지), 사양 (2 페이지), 자주 묻는 질문 (4 페이지), 서비스 매뉴얼 (20 페이지)
페이지 인쇄
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Scanning Problems
Cannot find the scanner or start Epson Scan
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the printer off and back on, and then try restarting Epson Scan. Check
the
Timeout Setting
Scan Help.
■
If you have a firewall or Internet security software installed, the search feature
in
EPSON Scan Settings
Network Status Sheet (see below), open
(if necessary), click
Network
address manually.
■
If you are scanning a large document at high resolution, a communication
error may occur. If the scan did not complete, lower the resolution.
Cannot scan using the control panel over your network
■
Make sure you've restarted your computer after installing the software and
setting up the network connection. The printer cannot detect your computer
until you've restarted it.
■
Check to make sure your computer isn't in sleep mode.
Print a Network Status Sheet
1. Press the
Home
2. Select
Network Settings
3. Select
Confirm Network Settings
4. Press the x
Start
in
EPSON Scan Settings
may not work correctly. In this case, print a
, click
Add
button, if necessary, and select
.
button to print a network status sheet.
. For details, see the Epson
EPSON Scan Settings
Enter address
Setup
.
, select
, and enter the IP
.
Troubleshooting
33