Siemens WS G Series 사용 설명서 및 설치 지침 - 페이지 13
{카테고리_이름} Siemens WS G Series에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WS G Series 28 페이지.
페이지 인쇄
1
Operating the
appliance
Install and connect washing
Note:
O p e r a t i n g t h e a p p l i a n c e
machine properly. ~ Page 21
Before the 1st wash, wash once
without any washing. ~ Page 27
Preparing the washing
machine
Notes
Never switch on a damaged
■
washing machine!
Inform customer service!
■
~ Page 20
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
emptied. Empty if necessary.
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be
rotated in both directions.
The washing machine is switched on.
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
Operating the appliance
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
~ Page 12
Placing laundry into the drum
:
Warning
Risk to life!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
Mix items of washing of varying
■
sizes. Laundry items of different
sizes distribute themselves better
during the spin cycle. Individual
laundry items may cause an
unbalanced load.
Observe the maximum indicated
■
load. Overfilling adversely affects the
washing result and encourages
creasing.
Unfold presorted laundry items and
1.
place them in the washing drum.
Ensure that no items of laundry are
2.
trapped between the door and
rubber seal.
en
13