Siemens WS09X260HK 작동 및 설치 지침 - 페이지 48
{카테고리_이름} Siemens WS09X260HK에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WS09X260HK 49 페이지. X 09 26
페이지 인쇄
Transport,
e.g. when moving
Preparing and inserting the
transport bolts
48
Before transporting the washing machine:
- Turn off the tap.
- Reduce the water pressure in the water inlet hose
(refer to page 32).
- Drain any residual washing solution (refer to
page 31).
- Disconnect the washing machine from the mains.
- Dismantle the supply and drainage hose.
- Install transportation protection devices.
Having transported the appliance and ensured
proper installation and connection, allow the Single
spin B" programme to run through before starting the
first wash programme.
Transporting the washing machine:
q Remove the lower covers.
q Prepare the transport bolts:
Loosen the screw in the sleeve until the end of the
screw is level with the end of the sleeve.
q Attach and close the cover plate.
The catch on the washer must sit inside the groove
on the rear housing panel.