Siemens WS10X261BY 사용 설명서 - 페이지 4
{카테고리_이름} Siemens WS10X261BY에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens WS10X261BY 10 페이지.
페이지 인쇄
The machine was tested before leaving the factory.To remove any water
left over from testing procedures, the first washing cycle should be car-
ried out without any laundry in the machine
Sort and load the laundry
Follow manufacturer's care information.
Sort according to the information on the care labels.
Sort according to type, colour, level of soiling and temperature.
Do not exceed the maximum load
Observe the instructions in the Important information section
Load both large and small items of washing together.
Close the washing machine door
Take care not to trap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate amount according to:
Amount of laundry, level of soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser.
During operation: take care when opening the detergent drawer.
Dilute viscous fabric softener and fabric conditioner with water. This
prevents blockages.
For detailed programme information, see programme overview
Select additional functions
For additional functions
Press the Start/Reload
Page 8.
1
Page 7.
Page 8!
2
3
4
Set the programme
page 7.
For option buttons
page 5.
5
page 6.
6
button
The programme starts.
Washing
Detergent drawer
with dispenser II,
, I
Drum
Control panel
Door handle
Maintenance cover
3
10
Removing the laundry
Open the washing machine door and remove the laundry.
Leave the door and detergent drawer open to allow the
interior of the machine to dry.
9
Turn off the tap
8
Switch off
– If the childproof lock is active, deactivate it
– Set Programme selector to Off.
7
Programme ended when ...
– "
" and " " appear on the display field, and the
buzzer sounds.
– "
" appear on the display field, and the buzzer
sounds.
page 5 Special symbol
Changing the programme ...
If you have accidentally selected the wrong programme:
– If the childproof lock is active, deactivate it
– Turn the programme selector to a newly selected
programme.
– If required, select additional functions.
– Press the Start/Reload
button, new programme
starts.
Pausing a programme ...
If you would like to pause a programme while it is running
without changing the sequence:
– If the childproof lock is active, deactivate it
– Press the Start/Reload
button:
When "
" and "
" flash on the display field, wait for
at least 2 minutes.
When "
" and " " appear, the door can be
opened. If required, add/remove the laundry.
If "
" appears for a prolonged period, the door can-
not be opened for reasons of your safety.
– Press the Start/Reload
button to continue the
programme.
... or terminate the programme
If you would like to terminate a programme:
– If the childproof lock is active, deactivate it
– Turn the programme selector to
– Press the Start/Reload
button.
– Remove the laundry after the spinning cycle.
page 6.
page 6.
page 6.
page 6.
Spin/Empty
.
4