Siemens XQG80-WM10P1601W 사용 설명서 및 설치 지침 - 페이지 9
{카테고리_이름} Siemens XQG80-WM10P1601W에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens XQG80-WM10P1601W 40 페이지.
Siemens XQG80-WM10P1601W에 대해서도 마찬가지입니다: 사용 설명서 및 설치 지침 (34 페이지)
Control panel
Note:
All buttons are sensitive, they only need to be touched gently.
( Select a programme. Rotating the
programme selector in either direction is
possible. Programme Overview, refer to
Change programme settings of the selected
programme and select programme options:
0 Select
0 (Spin speed),
(Finish in) buttons and change. ,
8 Select
(Rinse plus) button.
Display symbols
û
(speed/eco),
Getting to know your appliance
@ Start wash programme. Select
I (Start/Pause) button to start,
interrupt (e.g. reload washing) and cancel the
programme .
H Switch off the appliance. Set Programme
selector to $
Programme progress symbols
¼ Washing: On if the washing cycle is running.
¬ Rinse: On if the rinse cycle is running.
0 Spin: On if the spin cycle is active.
Programme information symbols
| Tap: Flashing if Tap was not opened or no water
supply.
o Overdosage: On if too much detergent used.
v Door unlocked: On if door can be opened.
w Childproof lock: On if childproof lock is activated.
Activate/deactivate the childproof lock. ~ Page 13
(Off).
en
9