Siemens XQG80-WM10P1681W 사용 설명서 및 설치 지침 - 페이지 14
{카테고리_이름} Siemens XQG80-WM10P1681W에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens XQG80-WM10P1681W 34 페이지.
페이지 인쇄Operating the appliance
en
Changing the programme
if you have mistakenly started a wrong
programme.
Select Start/Reload.
1.
Select another programme.
2.
If required, adjust the presetting
and/or select other functions.
Select Start/Reload. The new
3.
programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
Select Start/Reload.
1.
Cool down washing: select Rinse
2.
Select Start/Reload.
3.
For programmes at low temperature:
Select Start/Reload.
1.
Select Spin.
2.
Select Start/Reload.
3.
End of the programme
Start/Reload indicate light goes out and
End or - - - - (if - - - - was selected,
without drain) appears on the display
field, buzzer sounds. Set volume of
buzzer ~ Page 19
If - - - - was selected, - - - - is displayed
after the programme ends, touch Start/
Reload button.
Notes
The programme continues by
■
pumping out the water and spinning
the washing (the standard spin
speed can be changed beforehand).
If only the water is to be pumped out,
■
press the Start/Reload button again
before the spinning starts. The
programme is interrupted and the
door lock is released. The washing
can be removed.
14
After washing
Set programm selector to $ Off.
1.
Open appliance door and remove
2.
washing.
Notes
– Do not leave any items
of washing in the drum.
In the next wash they may shrink
or discolour something else.
– Remove any foreign objects from
the drum and the rubber seal.
Notes
– Leave detergent drawer and door
open so that residual water can
evaporate.
– Always remove the washing.
Turn off the tap.
3.