Siemens XQG80-WM10P1681W 사용 설명서 및 설치 지침 - 페이지 22

{카테고리_이름} Siemens XQG80-WM10P1681W에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens XQG80-WM10P1681W 34 페이지.

Cleaning and maintenance

Close service flap. If required,

engage disengaged service flap

beforehand.

To prevent unused detergent

Note:

from flowing into the outlet during the

next wash: Pour 1 litre of water into

dispenser II and start the Spin

programme.

Drainage hose on the siphon

blocked

Turn the programme selector to $

Off. Pull out the mains plug.

Residual water may run out!

Note:

Loosen hose clip, carefully remove

drainage hose.

Clean drainage hose and siphon

spigot.

Re-attach drainage hose and secure

connection point with hose clip.

Filter in the water inlet hose

blocked

First, release water pressure in the

supply hose:

Turn off the tap!

Select any programme (except Spin

programme).

Select Start/Reload. Leave

programme for approx. 40 seconds.

Switch off the appliance. Pull out the

mains plug.

Clean the filter:

Disconnect the hose from the water

tap.

Clean filter with small brush.

and/or:

Remove hose from the rear of the

appliance.

Take out filter with pliers and clean.

Connect the hose and check for

leaks.