Digital ID View IV-PBC-01 사용자 설명서 - 페이지 9

{카테고리_이름} Digital ID View IV-PBC-01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital ID View IV-PBC-01 17 페이지. Law enforcement audio and video recorder

device will give two short vibrations together with a beep prompt,
the indicating light will stop blinking, and the device will stop
recording and will save the video file.
When the device is in the power-off state, press the recording
button for 3 seconds, the device will power on automatically and
start the video-recording function. To end and save the video file,
press the recoding button again, the device will give two short
vibrations together with a beep prompt, the indicating light will
stop blinking, and the device will stop recording and will save the
video file.
In dark environments, press the IR button to activate the two IR
LEDs. Once activated, video and snap shots are in black and white.
 Photo-shooting:
After being powered on, the device will directly enter the camera
preview mode, press the photo button to take snap shot photos. If
taking snap shot photos in low light or dark environments, activate
the IR LEDs for improved results.
When recording a video, press the photo button to capture a snap
shot photo while recording is being conducted.
 Audio recording:
After being powered on, the device will directly enter the camera
preview mode, press the audio-recording button to begin to record
audio. The device will then produce a series of beeps, vibrations,
Dallas, TX 75234 Tel: 972-247-1203 Fax: 972-247-1291
12000 Ford Road, Suite 110
www.idview.com
Page 9 of 16