Cisco 7925G - Unified Wireless IP Phone VoIP 사용자 설명서 - 페이지 6

{카테고리_이름} Cisco 7925G - Unified Wireless IP Phone VoIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7925G - Unified Wireless IP Phone VoIP 28 페이지. Wavelink avalanche management console
Cisco 7925G - Unified Wireless IP Phone VoIP에 대해서도 마찬가지입니다: 데이터시트 (8 페이지), 릴리스 정보 (16 페이지), 액세서리 매뉴얼 (20 페이지), 액세서리 매뉴얼 (13 페이지), 관리 매뉴얼 (19 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (16 페이지), 빠른 매뉴얼 (14 페이지), 관리 매뉴얼 (23 페이지), 설치 매뉴얼 (21 페이지), 관리 매뉴얼 (14 페이지)

Connecting Your Phone

This section shows how to use the connectors on your Cisco IP phone.

Your system administrator will configure your new Cisco Unified Wireless IP Phone to connect to the corporate wireless

network and the IP telephony network.

A rechargeable lithium ion battery powers the Cisco Unified Wireless IP Phone 7925G. Before using your phone, you must

install the battery in the phone and then charge the battery. Depending on the type of battery you have, the fully charged battery

provides these hours of service:

• The standard battery provides up to 9.5 hours of talk time or up to 180 hours of standby time.

• The extended battery provides up to 13 hours of talk time or up to 240 hours of standby time.

Install or remove the battery by following these steps:

Install the Battery

1. Insert the battery catches in the slots at the bottom of the phone. Ensure metal contacts on the battery and the phone face

each other.

2. Press the battery to the phone until it locks into place.

Remove the Battery

1. Press up on the locking catch with one hand.

2. With the other hand, hold the battery at the edges and pull out to remove the battery.