Cisco 7931G - Unified IP Phone VoIP 관리 매뉴얼 - 페이지 11

{카테고리_이름} Cisco 7931G - Unified IP Phone VoIP에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7931G - Unified IP Phone VoIP 20 페이지. For cisco unified callmanager express 4.0
Cisco 7931G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 관리 매뉴얼 (10 페이지), 관리 매뉴얼 (17 페이지), 설치 지침 (4 페이지), 매뉴얼 (30 페이지), 관리 매뉴얼 (12 페이지), 빠른 참조 (2 페이지), 빠른 참조 카드 (2 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄
Cisco 7931G - Unified IP Phone VoIP 관리 매뉴얼
Chapter 8
Monitoring the Cisco Unified IP Phone Remotely
Table 8-2
Item
Headset enabled
User Locale Version
Network Locale
Version
PC Port Disabled
Speaker Enabled
GARP Enabled
Video Capability
Enabled
Voice VLAN Enabled
Auto Line Select
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for
Configuration
DSCP for Services
Security Mode
Web Access Enabled
Span to PC Port
PC VLAN
CDP: PC Port
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17751-01
Network Configuration Area Items (continued)
Description
Indicates whether the Headset button is enabled on the
phone.
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled
or disabled.
Indicates whether the speakerphone is enabled on the
phone.
Indicates whether the phone learns MAC addresses
from Gratuitous ARP responses.
Indicates whether the phone can participate in video
calls when connected to an appropriately equipped PC.
Indicates whether the phone allows a device attached
to the PC port to access the Voice VLAN.
Indicates whether the phone shifts the call focus to
incoming calls on all lines.
DSCP IP classification for any phone configuration
transfer.
DSCP IP classification for phone-based services.
Displays the security mode that is set for the phone.
Indicates whether web access is enabled (Yes) or
disabled (No) for the phone.
Indicates whether the phone will forward packets
transmitted and received on the network port to the
access port.
VLAN used to identify and remove 802.1P/Q tags
from packets sent to the PC.
Indicates whether CDP is supported on the PC port.
Network Configuration
8-11