Cisco 7931G - Unified IP Phone VoIP 설치 지침 - 페이지 3

{카테고리_이름} Cisco 7931G - Unified IP Phone VoIP에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7931G - Unified IP Phone VoIP 4 페이지. For cisco unified callmanager express 4.0
Cisco 7931G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 관리 매뉴얼 (10 페이지), 관리 매뉴얼 (17 페이지), 관리 매뉴얼 (20 페이지), 매뉴얼 (30 페이지), 관리 매뉴얼 (12 페이지), 빠른 참조 (2 페이지), 빠른 참조 카드 (2 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄
Cisco 7931G - Unified IP Phone VoIP 설치 지침
Phone Installation
Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.

TAPS Registration

TAPS might be used either for a new phone or to replace an existing phone. To register with TAPS, pick up
the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts.
You might need to enter your entire extension, including the area code. After your phone displays a confirmation
message, hang up. The phone restarts.

Headset Support

Although Cisco Systems performs limited internal testing of third-party headsets for use with the Cisco Unified
IP Phones, Cisco does not certify or support products from headset (or handset) vendors.
Cisco recommends the use of good quality headsets that are screened against unwanted radio frequency (RF)
and audio frequency (AF) signals. Depending on the quality of the headsets and their proximity to other
devices such as mobile phones and two-way radios, some audio noise or echo may still occur. An audible
hum or buzz may be heard by either the remote party or by both the remote party and the Cisco Unified IP
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
TAPS Registration
3