Cisco 7931G - Unified IP Phone VoIP 매뉴얼 - 페이지 16

{카테고리_이름} Cisco 7931G - Unified IP Phone VoIP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7931G - Unified IP Phone VoIP 30 페이지. For cisco unified callmanager express 4.0
Cisco 7931G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 관리 매뉴얼 (10 페이지), 관리 매뉴얼 (17 페이지), 관리 매뉴얼 (20 페이지), 설치 지침 (4 페이지), 관리 매뉴얼 (12 페이지), 빠른 참조 (2 페이지), 빠른 참조 카드 (2 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄
Cisco 7931G - Unified IP Phone VoIP 매뉴얼

Security Profiles

Feature
Phone hardening
802.1X Authentication
Security Profiles, on page 16
Device Configuration Menu
Secure Conference Call Identification, on page 17
Security Profiles
Cisco Unified IP Phones that support Cisco Unified Communications Manager 7.0 and later use a security
profile, which defines whether the phone is nonsecure, authenticated, or encrypted. For information about
configuring the security profile and applying the profile to the phone, see the Cisco Unified Communications
Manager Security Guide.
To view the security mode that is set for the phone, look at the Security Mode setting in the Security
Configuration menu.
Related Topics
Authenticated, Encrypted, and Protected Phone Calls, on page 17
Device Configuration Menu
Security Configuration Menu
Secure Conference Call Identification, on page 17
Security Restrictions, on page 23
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
16
Description
Additional security options, which you control from Cisco Unified Communications Manager
Administration:
• Disabling PC port
• Disabling Gratuitous ARP (GARP)
• Disabling PC Voice VLAN access
• Disabling access to the Setting menus, or providing restricted access that allows access
to the User Preferences menu and saving volume changes only
• Disabling access to web pages for a phone.
You can view current settings for the PC Port Disabled, GARP Enabled, and Voice
Note
VLAN enabled options by looking at the phone's Security Configuration menu. For
more information, see
The Cisco Unified IP Phone uses 802.1X authentication to request and gain access to the
network. For more information, see
Device Configuration
Menu.
802.1X Authentication, on page
Cisco Unified IP Phone 7931G
20.