Cisco 7940G 관리 매뉴얼

{카테고리_이름} Cisco 7940G에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 29 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

Cisco 7940G 관리 매뉴얼
Initializing Cisco Unified IP Phones
This chapter describes the initial firmware installation tasks and configuration process for the Cisco
Unified IP Phone 7960G and 7940G in a Session Initiation Protocol (SIP) network. It provides
information on the following:
Prerequisites
Ensure that your network meets the following requirements:
OL-7890-01
Prerequisites, page 3-1
Overview of the Initialization Process, page 3-3
About Configuration Files, page 3-3
How to Customize the Default Configuration File, page 3-4
How to Customize a Phone-Specific Configuration File, page 3-8
Configuring the SIP Parameters Manually, page 3-10
How to Set the Date and Time, page 3-18
How to Create Dial Plans, page 3-23
How to Verify Initialization, page 3-27
Where to Go Next, page 3-28
A working IP network is established and configured for SIP.
For information on configuring IP, refer to the Cisco IOS IP Configuration Guide.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ip_vcg.htm
VoIP is configured on your Cisco routers.
For information on configuring VoIP, refer to the Cisco IOS Voice Configuration Library.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vcl.htm
VoIP gateways are configured for SIP.
A TFTP server is configured on your network and has the files that the phone requests.
Files are available from cisco.com.
Note
When the phone initializes, it requests the following from the TFTP server:
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
C H A P T E R
3
3-1