Samsung U28R550 사용자 설명서 - 페이지 28

{카테고리_이름} Samsung U28R550에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung U28R550 45 페이지.
Samsung U28R550에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지)

페이지 인쇄
Samsung U28R550 사용자 설명서

Screen Ratio

Select the image size for each screen.
PBP Mode (available in PBP mode(Screen Size
In
PC
mode
•
Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In
AV
mode
•
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Screen
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
― The input source is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can
support all of these signals.).
― This can only be set when the external input is connected through HDMI/DP and
AV.
PIP Mode (available in PIP mode (Screen Size
In
•
•
))
In
•
•
•
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
PC/AV Mode
is set to
PC
mode
Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
AV
mode
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
― The input source is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can
support all of these signals.).
― This can only be set when the external input is connected through HDMI/DP and
AV.
/
/
))
PC/AV Mode
is set to
28