Samsung U32J590UQ Series 사용자 설명서 - 페이지 31

{카테고리_이름} Samsung U32J590UQ Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung U32J590UQ Series 48 페이지.
Samsung U32J590UQ Series에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (50 페이지), 사용자 설명서 (48 페이지)

페이지 인쇄
Samsung U32J590UQ Series 사용자 설명서

Source

Select the source for each screen.
PIP Mode (available in PIP
mode(Size
― The input source for the main screen changes.
― With the exception of the current input source, the other two input sources can be selected.
― The screen may flicker if the input signal is unstable.
― When the Function Key Guide appears, move the JOG button LEFT to select the
JOG button. The main screen will switch in the order
PBP Mode (available in PBP
mode(Size
― The input source for the main screen changes.
― The screen may flicker if the input signal is unstable.
― When the input signal of the left and right screens are the same, the operation cannot be performed.
― When the Function Key Guide appears, move the JOG button LEFT to select the
JOG button. The same PBP source setting menu appears.
/
/
))
icon and then press the
DisplayPort
→
HDMI1
→ HDMI2.
))
icon and then press the

Picture Size

PIP Mode (available in PIP mode
Select the image size for sub-screen.
In
PC
mode
•
Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In
AV
mode
•
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Screen
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
― A digital output device is connected using the HDMI/DP cable.
― The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
― This can only be set when the external input is connected through HDMI/DP and
AV.
(Size
/
/
))
PC/AV Mode
is set to
31