ACD DS260 매뉴얼 - 페이지 10

{카테고리_이름} ACD DS260에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD DS260 16 페이지.

3.2.5 Switching on the M260SE Handheld Terminal

In order to switch on the device, press the "C" button and the "orange enter" button to the right of "0"

simultaneously until the LED beneath it lights up. You can then release the buttons. The desktop of your

operating system or your usual work environment appears on the display.

You can see the buttons, you have to press to switch on the device as shown in Figure 6.

Figure 6: Switching on the M260SE

In suspend mode, the operating system and the application running on it are stopped. The display is

switched off and consequently becomes dark. Suspend mode can be accessed by simultaneously pressing

the "C" button and the "orange enter" button to the right of "0". Upon leaving suspend mode (switching on the

M260SE), the application and the operating system starts to run from the same point. Thanks to both

measures, the M260SE only uses a small amount of power.

Figure 7: Suspend Mode of the M260SE

M260SE_Brief_Overview_FCC_V1.00_en_es.docx

10 / 33