ACD DS260 매뉴얼 - 페이지 5

{카테고리_이름} ACD DS260에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD DS260 16 페이지.

3 Handling

Read all instructions first before using the M260SE!

Do not drink any alcohol or take any drugs while using the M260SE

and follow the saftey instructions carefully!

In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into

the supplied DS260 docking station (if included in the scope of delivery), also see Section 3.2. Using the

supplied power supply unit, connect the docking station to the mains (Power LED shows a green light), also

see Section 3.2.

The battery charging process has been completed when the 'CHARGE' LED is green.

You can now use the M260SE handheld terminal.

You can see the battery charging process in Figure 2.

Only original ACD power supply units and ACD-approved batteries

may be used for the operation of the M260SE and the DS260. The

utilization of non-approved components can lead to the

destruction of the device. Remove the battery from the device if it

ATTENTION

is not used for an extended period of time.

The M260SE battery is a lithium polymer battery pack. Lithium

polymer battery packs can explode if exposed to fire. Do not

disassemble the battery pack and do not expose it to fire or heat

ATTENTION

(greater than 140 °F).

Prior to each use, the mobile data acquisition terminal, the docking

station and the connection cables must be inspected for damages.

Damaged parts must be replaced. Please contact ACD in either

ATTENTION

case.

M260SE_Brief_Overview_FCC_V1.00_en_es.docx

5 / 33