Epson BrightLink 1480Fi 사용자 설명서 부록 - 페이지 32

{카테고리_이름} Epson BrightLink 1480Fi에 대한 사용자 설명서 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 1480Fi 34 페이지.
Epson BrightLink 1480Fi에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지)

페이지 인쇄

Solving Miscellaneous Problems

Check the solutions in these sections if you have other problems.

g g Related Links

• "Solving Split Screen Problems"

• "Solving USB Display Problems"

• "Solving User Pattern Saving Problems"

• "Solving Screen Mirroring Problems"

Solving Split Screen Problems

If you cannot operate the split screen feature, try the following solutions.

• If you cannot select the PC Interactivity source, make sure the USB

Display source is not included in one of the input sources. Select a different

input source, if possible.

• The split screen may not appear when you use the Scale feature or the Edge

Blending feature. Turn them off, if possible.

Solving USB Display Problems

If you cannot project an image using the USB Display feature, try the

following solutions.

• When you use the control pad (ELPHD02), the projector cannot detect the

image signal input from the projector's USB-B port. Connect the USB cable

to the control pad.

Solving User Pattern Saving Problems

If you fail to save a user pattern, try the following solution.

• You cannot save content that is protected by HDCP. Project an unprotected

image and save again.

p.32

Solving Screen Mirroring Problems

If you cannot project a screen mirroring image, try the following solutions.

• If you set the Capture setting to Enabled, the HDCP feature is disabled and

you may not be able to project content with the HDCP feature. Set the

Capture setting to Disabled.

Network > Network Settings > Network Projection > Screen

Mirroring > Capture