Siemens SIMATIC S7-1200 매뉴얼 - 페이지 4

{카테고리_이름} Siemens SIMATIC S7-1200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1200 31 페이지. Controlling several fans (ebm-papst) via modbus rtu
Siemens SIMATIC S7-1200에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 사용 설명서 (36 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 매뉴얼 (40 페이지), 매뉴얼 (17 페이지), 매뉴얼 (49 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

1 Introduction

Introduction

1.1

Overview

The SIMATIC S7-1200 can be operated as a PROFINET controller. For this, the

PROFINET-capable SINAMICS G120 drive can be used as PROFINET device and

be controlled by SIMATIC S7-1200.

This application example specifies a setpoint speed for a SINAMICS G120 drive.

The drive is controlled using the control word.

Overview of the application example

The following figure provides an overview of the application example.

Figure 1-1: Overview

SINAMICS G120

1.2

Requirements of the application example

Table 1-1: Requirements of the application example

Requirement

Access to process data

Monitoring the

communication

Safety function of the

SINAMICS G120

Drehzahlachse mit SINA_SPEED

Entry-ID: 109485727,

V1.0,

SIMATIC S7-1200

The control word switches the SINAMICS G120 drive on or off

and specifies the setpoint speed value.

Pending faults at the drive are displayed and acknowledged.

The communication connection between the controller and the

drive are monitored for interruptions.

The SINAMICS G120 will have the option of performing a fail-

safe shutdown (STO).

06/2017

SIMATIC HMI

PROFINET IE

Explanation