Siemens SIMATIC S7-1200 매뉴얼 - 페이지 19

{카테고리_이름} Siemens SIMATIC S7-1200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1200 49 페이지. Controlling several fans (ebm-papst) via modbus rtu
Siemens SIMATIC S7-1200에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 사용 설명서 (36 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 매뉴얼 (40 페이지), 매뉴얼 (17 페이지), 매뉴얼 (31 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

3 Mode of Operation

With read access, the read data are successively ("RegisterIndex") written into the

corresponding register file ("Index") of the addressed fan depending on the access

mode:



Interface parameter "holding" for the holding registers ("mode" = 0)



Interface parameter "input" for the input registers ("mode" = 104)

If necessary, the read value ("uint") is subsequently converted into the

corresponding floating point value ("real") depending on the calculation instruction

("calc").

With write access ("write.req"), the entered floating point value ("real") is converted

into the corresponding data value in the format "UInt" if necessary and

subsequently written into the data buffer "dataPtr" of the Modbus_Master and

transmitted to the fans ("write.fanRange.start" bis "write.fanRange.end") based on

the calculation instruction ("calc").

As the only exception, the holding register "Password" to write to has a length of

3 words (see

elements are transmitted ("dataPtr [0..2] = uint [0..2]").

Controlling several fans (ebm-papst) via Modbus RTU

Entry ID: 109476801,

V2.0,

Table

3-1). Here, the first and additionally the two following field

09/2018