Siemens SIMATIC S7-1200 매뉴얼 - 페이지 35

{카테고리_이름} Siemens SIMATIC S7-1200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1200 49 페이지. Controlling several fans (ebm-papst) via modbus rtu
Siemens SIMATIC S7-1200에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 사용 설명서 (36 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 매뉴얼 (40 페이지), 매뉴얼 (17 페이지), 매뉴얼 (31 페이지), 매뉴얼 (20 페이지)

페이지 인쇄

4 Installation and Commissioning

No.



Disable the option "DHCP".



Enter the network setting from

Figure 4-1

–

IP address: 192.168.0.2

–

Subnet mask = 255.255.255.0

"Default gateway" is irrelevant.

–



Select "Auto negotiation" in the

Ethernet parameters to

automatically determine the speed

transmission.

Downloading the HMI project part into the KTP900 Basic

Connect your PG/PC to the HMI either directly or using the CSM1277 switch.

Table 4-10

No.



Select the operator panel folder "HMI_1

[KTP900 Basic PN]".



Click the "Download to device" button to

download the HMI project part into the

KTP900 Basic.



When the "Extended download to device"

window opens, select "PN/IE" as the type

of the PG/PC interface. "PN/IE".



Select the network card you are using as

the PG/PC interface.

Controlling several fans (ebm-papst) via Modbus RTU

Entry ID: 109476801,

V2.0,

Action

for the HMI:

Action

09/2018

Remarks