Cisco 7941G - Unified IP Phone VoIP 관리 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 7941G - Unified IP Phone VoIP에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7941G - Unified IP Phone VoIP 16 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7941G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (13 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 전화 매뉴얼 (30 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (6 페이지), 문제 해결 및 유지 관리 (27 페이지)

Cisco Unified IP Phones Installation

Procedure

Step 1

Connect the handset to the Handset port.

Step 2

Connect a headset to the Headset port.

You can add a headset later if you do not connect one now.

Step 3

(Cisco Unified IP Phones 7962G and 7942G only): Connect a wireless headset.

You can add a wireless headset later if you do not want to connect one now.

See the wireless headset documentation for information.

Step 4

Connect the power supply to the Cisco DC Adapter port.

Step 5

Connect a straight-through Ethernet cable from the switch to the network port labeled 10/100 SW on the Cisco

Unified IP Phones 7962G, 7942G, 7961G, and 7941G, or to the network port labeled 10/100/1000 SW on the

Cisco Unified IP Phones 7961G-GE and 7941G-GE.

Each Cisco Unified IP Phone ships with one Ethernet cable in the box.

You can use either Category 3/5/5e cabling for 10-Mbps connections, but you must use Category 5/5e for

100 Mbps connections.

Step 6

Connect a straight-through Ethernet cable from another network device, such as a desktop computer, to the

access port labeled 10/100 PC port on the Cisco Unified IP Phones 7962G, 7942G, 7961G, and 7941G, or to

the network port labeled 10/100/1000 PC on the Cisco Unified IP Phones 7961G-GE and 7941G-GE.

You can connect another network device later if you do not connect one now.

You can use either Category 3/5/5e cabling for 10-Mbps connections, but you must use Category 5/5e for

100 Mbps connections.