Siemens SITRANS RD500 사용 설명서 - 페이지 17
{카테고리_이름} Siemens SITRANS RD500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS RD500 48 페이지. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 애플리케이션 매뉴얼 (6 페이지), 매뉴얼 (11 페이지), 적용 사례 (9 페이지)
페이지 인쇄
STARTED - System restarted after config update.
BATTERY - Battery is low.
ALARM - Alarm event for any connected I/O showing OK, LO LO, LO, HI, HI HI.
DEVICE - ONLINE, OFFLINE.
Data Logs
Data logs record instrumentation values being collected, set as per your connected I/O.
The various events recorded to CompactFlash are explained below. They are available for
viewing, downloading, or transferred via FTP synchronization.
Log files can have a user configured timestamp, I/O value, and tag name.
Data Log Configuration
See
Alarms
The Alarms page allows modification of the I/O alarm trigger points.
After entering the appropriate alarm values (HI HI, HI, LO, and LO LO), click Apply to store
the new information.
Reset will clear the current typed values and will return to last saved values (will not
reset to factory defaults.)
When an alarm trigger point is set and activated, the Overview screen will show alarm
conditions using colors. If the functionality is set up, the alarm trigger point can result in
an email or SMS alarm message being sent to someone on the contact list.
As well, alarms can also be logged and can be sent via FTP synchronization to a central
server. They can be sent using the RD500 built-in FTP client server (contact your FTP
server administrator for necessary access information).
After factory reset, the event log will be erased and some data log files may
Note:
be overwritten. Be sure to backup your data log files before any factory reset.
7ML19985MA01
SITRANS RD500 – OPERATING INSTRUCTIONS
on page 30 for details on creating and deleting logs.
Page 15