Siemens SITRANS RD500 사용 설명서 - 페이지 30

{카테고리_이름} Siemens SITRANS RD500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS RD500 48 페이지. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 애플리케이션 매뉴얼 (6 페이지), 매뉴얼 (11 페이지), 적용 사례 (9 페이지)

페이지 인쇄
Siemens SITRANS RD500 사용 설명서
Once the appropriate Modbus devices and registers have been defined, click Configure.
•
The Tag property allows a descriptive name to be applied to the I/O channel,
e.g. HydroRanger 200 1. Avoid using duplicate names.
•
The Sign property can be Unsigned, Soft, or Hard Signed.
•
The View property is used to set the display of the channel's information in the
overview screen.
•
Before DP indicates the number of decimal places before the decimal in the data
displayed.
•
After DP indicates the number of decimal places after the decimal in the data
displayed.
•
The Units are user defined in this text field. Units can be entered based on customer
application specific requirements.
•
The Log property is used to select the log file into which the channel's data is
recorded.
After adding Configuration information, click Apply to write changes to the RD500.
Page 28
SITRANS RD500 – OPERATING INSTRUCTIONS
7ML19985MA01