Siemens SITRANS RD500 사용 설명서 - 페이지 34
{카테고리_이름} Siemens SITRANS RD500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS RD500 48 페이지. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 애플리케이션 매뉴얼 (6 페이지), 매뉴얼 (11 페이지), 적용 사례 (9 페이지)
FTP Server and Client
FTP Server
The RD500's FTP Server provides a means to exchange files between the CompactFlash
card and an FTP client application. The RD500 will act as a server, waiting for client
applications to connect and download.
This also allows remote users to access the CompactFlash card as if it were a drive
within the PC. Log files can be manually copied and pasted from the RD500 to the user's
computer.
From the Overview page, click Configure and then FTP to configure this facility.
Check Enable FTP Server check box to activate the FTP Server support. The following
setting then applies.
•
The Anonymous Access defines the rights for a user accessing the server with
anonymous username and blank password. If Disabled, no anonymous users can
access the server. In Read-Only mode, the anonymous user can only download files
from the CompactFlash card. In Read-Write, the user will have full access to the
CompactFlash card. For security reasons, Disabled is recommended.
To access the FTP server when anonymous is disabled, the RD500 account
username and passwords should be used.
Accessing the Server
For anonymous access: to access an FTP server from a web browser, type
ftp://192.168.200.1 (replace 192.168.200.1 with your unit IP address).
For secure access: to access an FTP server from a web browser securely, type
ftp://admin:[email protected] (replace 192.168.200.1 with your unit IP address).
Page 32
SITRANS RD500 – OPERATING INSTRUCTIONS
7ML19985MA01