Siemens SITRANS RD500 매뉴얼 - 페이지 5

{카테고리_이름} Siemens SITRANS RD500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITRANS RD500 11 페이지. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Siemens SITRANS RD500에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 애플리케이션 매뉴얼 (6 페이지), 적용 사례 (9 페이지)

페이지 인쇄

Overview

This application guide outlines the requirements and procedure to connect SITRANS RD500

and Siemens MultiRanger via an RS-485 MODBUS connection.

The SITRANS RD500 is a remote data manager providing integrated web access, alarm event

handling, and data capture for instrumentation. Siemens MultiRanger is a versatile short- to

medium-range ultrasonic single and multi-vessel level monitor/controller. Process values from

MultiRanger (such as level, volume, flow, totalization and pumping statistics) can be logged

in SITRANS RD500.

This application guide describes how to:

1. Connect SITRANS RD500 to MultiRanger,

2. Set up a data log in the RD500 to record information from the MultiRanger, and

3. Configure SITRANS RD500 to read MODBUS registers from MultiRanger.

This application guide is an addition to the Operating Instructions. Please review the

operating instructions for the RD500 application, and RD500 hardware to ensure you are

familiar with configuring the SITRANS RD500.

Configuring SITRANS RD500 for connection to MultiRanger with MODBUS RTU

Application examples, 09/2020, AG111710