Siemens Sitrans WM100 사용 설명서 - 페이지 5
{카테고리_이름} Siemens Sitrans WM100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Sitrans WM100 16 페이지. Motion sensing switch
Siemens Sitrans WM100에 대해서도 마찬가지입니다: 사용 설명서 (22 페이지)
페이지 인쇄
SITRANS WM100 Motion
Sensing Switch
SITRANS WM100 motion sensing switch is a heavy-duty zero speed alarm. It is used to
detect the absence or presence of motion of rotating, reciprocating, or conveying
equipment. The WM100 has a circuit card and a magnetic assembly potted in the probe
body. The WM100 is powered from the line voltage and provides a set of dry relay
contacts to indicate motion when the ferrous targets of the machinery being monitored
pass in front of the probe.
Safety Notes
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
WARNING: relates to a caution symbol on the product, and means
that failure to observe the necessary precautions can result in
death, serious injury, and/or considerable material damage.
WARNING¹: means that failure to observe the necessary
precautions can result in death, serious injury, and/or considerable
material damage.
CAUTION: means that failure to observe the necessary precautions can
result in considerable material damage.
means important information about the product or that part of the operating
Note:
manual.
Safety marking symbols
In manual On Product
1.
This symbol is used when there is no corresponding caution symbol on the product.
7ML19985MW01
1
Description
Caution: refer to accompanying documents (manual) for
details.
Protective Conductor Terminal
SITRANS WM100 – OPERATING INSTRUCTIONS
Page 1