Siemens SKB62 Series 매뉴얼 - 페이지 7

{카테고리_이름} Siemens SKB62 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SKB62 Series 32 페이지. Auxiliary switch
Siemens SKB62 Series에 대해서도 마찬가지입니다: 설치 지침 (6 페이지), 설치 지침 (10 페이지), 설치 지침 (7 페이지), 설치 지침 (6 페이지), 설치 지침 (10 페이지), 설치 지침 (4 페이지)

페이지 인쇄

1. Connection Diagrams

The LED on the SKB62/MO cable adapter flashes red during the calibration, as the

positioning signal Y and the positioning feedback U do not correspond anymore. This is

interpreted as a blockage and thus indicated as an error.

If necessary, the calibration can be repeated any number of times.

LED indication of operational status

SKB60, SKB62.., SKB62/MO

The dual-colored LED indicating the operational status is visible when the cover is removed.

LED

indication

Lit green

Flashing green

Lit red

Flashing red

As a general rule, the LED can only assume the states shown above – continuously lit red or

green, flashing red or green, or off/dark.

Siemens

Smart Infrastructure

Function

Normal operation

Stroke calibration in progress

Faulty stroke calibration

Internal error

Inner valve jammed

No power supply

Dark

Electronics faulty

Remarks, troubleshooting

Automatic operation; everything o.k.

Wait until calibration is finished

(LED stops flashing, will be lit green or red)

Check mounting; restart stroke calibration (by short-circuiting

calibration slot)

Replace electronics

Troubleshoot, check valve, restart stroke calibration

Check mains network, check wiring

Replace electronics

CM1N4564en

2023-10-17