Siemens IQ 100 작동 및 설치 지침 - 페이지 39
{카테고리_이름} Siemens IQ 100에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens IQ 100 43 페이지.
Siemens IQ 100에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 설치 및 사용 설명서 지침 (16 페이지), 사용 설명서 (12 페이지), 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
Connecting the
water
Water inlet hose
d Risk of electric shock!
To prevent leaks or water damage, it is essential to
follow the instructions in this chapter!
Warning
Operate the washing machine with cold drinking
water only. Do not connect to the mixer tap of an
unpressurised hot water apparatus.
If in doubt, have the appliance connected by a
specialist.
The water inlet hose must not be
- kinked or crushed,
- modified or severed (strength is no longer
guaranteed).
Plastic threads must only be tightened by hand. Do
not remove the strainers from the water supply hose.
Check the mains water pressure:
- The water pressure should be between 1 and
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
- If the water pressure is higher, install a pressure
reducing valve.
Connect the water supply hose
q to the rear panel of the washing machine and ...
q to the tap.
q After connecting the water inlet hose:
Turn on the water tap completely, and check
connection points for water tightness.
39