Siemens SC73E810TI 사용 설명서 - 페이지 24

{카테고리_이름} Siemens SC73E810TI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SC73E810TI 40 페이지.

Cleaning and maintenance

Filters

The filters 1: keep large foreign

objects in the rinsing water away from

the pump. These foreign objects may

occasionally block the filters.

The filter system consists of a coarse

filter, a flat fine filter and a microfilter.

1. After each washing cycle check the

filters for residue.

2. Unscrew filter cylinder as illustrated

and take out filter system.

3. Remove any residue and clean filters

under running water.

4. Re-install filter system in reverse

sequence and ensure that the arrow

marks are opposite each other after

closing the filter system.

Limescale and contaminants in the

rinsing water may block nozzles and

bearings on the spray arms 1* and

12.

1. Check outlet nozzles on the spray

arms for blockages.

2. Unscrew the upper spray arm 1*.

3. Remove the lower spray arm 12

upwards.

4. Clean spray arms under running

water.

5. Re-engage or screw on spray arms.