Siemens SF64M330GB/15 사용 설명서 지침 - 페이지 19

{카테고리_이름} Siemens SF64M330GB/15에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SF64M330GB/15 29 페이지. Siemens dishwasher instructions for use

Programme interruption

Carefully open the door, it could happen

that water splashes out of the

appliance. Only open completely when

the spray arm no longer turns.

If the programme is already in "drying"

mode, an acoustic signal reminds you

to close the appliance door or to abort

the programme.

Switch OFF the main switch

Indicator light goes out. The programme

remains stored.

If warm water is connected or if the

machine is already heated up and the

appliance door has been opened, leave

the door slightly ajar, then close it,

otherwise the appliance door can jump

open through the expansion.

In order to continue the programme

flow, switch the main switch ON again

and close the door.

Cancel programme (Reset)

Only when the master switch is ON.

Press the A and C programme

buttons simultaneously and hold them

pressed for approx. 3 sec.

The programme continues for approx.

1 min.

The PROGRAMME END indicator and

the indicator for the programme that

has just been terminated light up.

Set main switch

Close the detergent compartment

To restart the dishwasher, set main switch

to ON again and select desired

programme.

Changing the programme

It is possible to change the programme

selection after you have switched the

dishwasher on, provided that you have not

yet closed the door.

If it is necessary to change the programme

after this, the programme cycle that has

already begun (e.g. washing) will still carry

on to the end.

to OFF.