Ï
Intensive zone *
Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket is
intensified, the rinsing temperature is
increased slightly.
¿
Extra drying *
An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.
I n t e n s i v e z o n e
E x t r a d r y i n g
Operating the appliance
Operating
the appliance
n c e
a p p l i a
n g t h e
O p e r a t i
Programme data
The programme data (consumption
values) can be found in the summary of
instructions. They refer to normal
conditions and the water hardness set
value
:
. Different influencing factors
such as e.g. water temperature or line
pressure may result in deviations.
Aqua sensor *
Aqua sensor *
Aqua sensor *
Aq u a s e n s o r
* depending on model
* depending on model
* depending on model
The Aqua sensor is an optical
The Aqua sensor is an optical
The Aqua sensor is an optical
measuring device (light barrier) which
measuring device (light barrier) which
measuring device (light barrier) which
measures the turbidity of the rinsing
measures the turbidity of the rinsing
measures the turbidity of the rinsing
water.
water.
water.
The Aqua sensor is used according to
The Aqua sensor is used according to
The Aqua sensor is used according to
the programme. If the Aqua sensor is
the programme. If the Aqua sensor is
the programme. If the Aqua sensor is
active, "clean" rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater, the
water is drained and is replaced with
fresh water. In the automatic
programmes the temperature and
running time can also be adjusted to the
degree of soiling.
Switching on the appliance
1. Turn on the tap fully.
2. Switch on ON/OFF switch (.
The Eco 50° programme display
flashes. This programme remains
selected if no other programme
button 0 is pressed. The expected
programme duration
flashes on the digital display )*.
3. Press the START button h.
The programme starts running.
en
21
페이지 인쇄