Cisco 7941G-GE - IP Phone VoIP 문제 해결 및 유지 관리 - 페이지 6

{카테고리_이름} Cisco 7941G-GE - IP Phone VoIP에 대한 문제 해결 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7941G-GE - IP Phone VoIP 27 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7941G-GE - IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (13 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지)

Cisco 7941G-GE - IP Phone VoIP 문제 해결 및 유지 관리

Intermittent Network Outages

Solution
Verify that the Ethernet connection to which the Cisco Unified IP Phone connects is up. For example, check
whether the particular port or switch to which the phone connects is down and that the switch is not rebooting.
Also ensure that no cable breaks exist.
Intermittent Network Outages
Problem
Your network may be experiencing intermittent outages.
Solution
Intermittent network outages affect data and voice traffic differently. Your network might be experiencing
intermittent outages without detection. If so, data traffic can resend lost packets and verify that packets are
received and transmitted. However, voice traffic cannot recapture lost packets. Rather than retransmitting a
lost network connection, the phone resets and attempts to reconnect to the network. Contact the system
administrator for information on known problems in the voice network.

DHCP Setting Errors

Problem
The DHCP settings may be incorrect.
Solution
The following suggestions can help you determine if the phone has been properly configured to use DHCP:
1. Verify that you have properly configured the phone to use DHCP. See
more information.
2. Verify that the DHCP server has been set up properly.
3. Verify the DHCP lease duration. We recommend that you set the lease duration to 8 days.
Cisco Unified IP Phones send messages with request type 151 to renew their DHCP address leases. If the
DHCP server expects messages with request type 150, the lease renewal is denied, forcing the phone to restart
and request a new IP address from the DHCP server.

Static IP Address Setting Errors

Problem
The static IP address assigned to the phone may be incorrect.
Solution
If the phone has been assigned a static IP address, verify that you have entered the correct settings.
Troubleshooting and Maintenance
6
Troubleshooting and Maintenance
Network Configuration Menu
for