Epson BrightLink 455Wi 운영 매뉴얼 - 페이지 24

{카테고리_이름} Epson BrightLink 455Wi에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 455Wi 47 페이지. Remote control information
Epson BrightLink 455Wi에 대해서도 마찬가지입니다: 브로셔 및 사양 (20 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 사용자 설명서 (8 페이지), 사용자 설명서 (7 페이지), 제품 지원 게시판 (5 페이지), 마운팅 템플릿 (5 페이지), 사용자 설명서 (25 페이지), 브로셔 및 사양 (6 페이지), 설치 핸드북 (10 페이지)

Epson BrightLink 455Wi 운영 매뉴얼
Monitoring window layout
The icon patterns and their meanings are explained below.
A
Type
Displays the projector status.
No warnings or problems
Warning or problem
An error has occurred on the projector.
Notification
The projector requires immediate attention.
Monitoring disabled
The projector is not being monitored. If you right-click the icon
and select Monitoring enabled, the projector will be added to
the projectors that are being monitored.
Data being updated
Network error (Monitor Password authentication error)
No Monitor Password was entered when the projector was
registered, or an incorrect Monitor Password was entered.
s p.12, p.15,
p.16
Network error (TCP connection error)
Network error (ESC/VP.net communication error)
B
Group name
When projectors are registered to a group, the name of the group that
the projector belongs to is displayed.
C
Display name
Shows the display name.
D
Power
Shows the power on status for the projector.
Power on and normal status
Power on and abnormal
status
*1
*2
*3
Power off and normal status
Power off and abnormal
status
E
Lamp Hours
Shows the lamp operating time for the projector. If the projector has 2
lamps, it shows the lamp operating time for both lamp 1 and lamp 2.
F
Temperature level
The following five icons display the differing internal temperature
status of the projector.
Internal temperature
normal
High-temperature
warning
Internal temperature
error
G
Error information
Shows a notification or warning/problem status using the following
icons.
Clean Air Filter Notice
Replace Lamp (Lamp 1)
Lamp error (Lamp 1)
Lamp failure at power on
(Lamp 1)
High-temperature warning
No Air Filter
Air Flow Sensor Err.
Supply System Error (Ballast
2)
Shutter warning
Lamp Error
Lamp Error (Lamp 2)
24
Internal temperature
normal
High-temperature
warning
*4
Replace Lamp
Replace Lamp (Lamp 2)
Lamp error (Lamp 2)
Lamp failure at power on
(Lamp 2)
Replace Air Filter
Low Air Flow
Supply System Error (Ballast
1)
Cinema filter warning
Lamp Cover Open
Lamp Error (Lamp 1)
Lamp failure at power on