Place a MeetMe Conference Call
To Place a MeetMe conference call:
1. Obtain a MeetMe conference number from your system administrator
2. Distribute the MeetMe conference number to all the participants.
3. Go offhook, press the MeetMe soft key, and dial the MeetMe conference number. All other participants join the meeting by
dialing into the MeetMe conference number.
4. To end the MeetMe conference call, all participants must hang up the handset or press the EndCall soft key.
End a Conference Call
To end the conference call:
• Hang up the handset, or press the EndCall soft key.
Depending on configuration when the conference call initiator disconnects, the conference call terminates.
Note
Alternate Methods to End a Conference Call
Call initiators can use one of the following methods (functionality will vary according to your system configuration):
• To end the conference and remain connected to the most recent call, press the Confrn soft key. The older call is placed on
hold.
• To disconnect from the conference, hang up the handset. The other parties remain on the conference call.
Live Record a Call
Call initiators can use the LiveRcd soft key to record an active call, private line or conference call. To record a call:
1. Press the LiveRcd soft key. This puts the other party on-hold and initiates a call to the configured live record number.
2. Press the LiveRcd again to stop the recording.
Join a Shared-Line Call (SCCP)
User can join a call on a shared line using the cBarge softkey.
To join the shared-line call:
1. Highlight the remote-in-use call that you want to join.
2. Press the more to navigate to cBarge and press cBarge.
Join a Shared Line Call (SIP)
User can join a non-private call on a shared line call by using either Barge or cBarge soft keys.
• Barge allows you to add yourself to the call by hosting the conference on your phone but does not allow others to join the
conference.
• cBarge allows you to add yourself to the conference and allows others to join the conference.
To join a shared line call:
1. Highlight the remote-in-use call that you want to join.
2. Press Barge or cBarge to join the call.
Tips
When you Barge a call, other parties hear a beep announcing your presence. You are disconnected from a call that you
–
have joined using Barge if the call is put on hold, transferred, or turned into a conference call by the Barge initiator.
14
페이지 인쇄