Epson BrightLink 480i 연결 매뉴얼 - 페이지 4

{카테고리_이름} Epson BrightLink 480i에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 480i 6 페이지. Lamp and status information
Epson BrightLink 480i에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지), 운영 매뉴얼 (47 페이지), 설치 매뉴얼 (5 페이지), 마운팅 템플릿 (5 페이지), 사양 (6 페이지), 적합성 선언 (4 페이지), 설치 핸드북 (3 페이지), 설치 핸드북 (2 페이지), 설치 핸드북 (5 페이지), 여기에서 시작하기 매뉴얼 (6 페이지)

페이지 인쇄
Epson BrightLink 480i 연결 매뉴얼

Connecting Document Cameras

Document cameras have several different types of ports for connecting to the projector.
For cameras that have USB ports, such as the EPSON DC-11 and EPSON DC-06, the best
way to connect is directly to the computer's USB port, as shown below. This will enable full
interactivity and dual pen support (using Easy Interactive Tools software) on the document
camera image.
To projector
Although you can connect the EPSON DC-06 directly to the projector's
port using a
USB-A
USB cable, this will provide only limited interactivity (using the built-in interactive toolbar).
For document cameras that do not have a USB port, you can connect to the projector's VGA
(
) or
port. This will allow use of the projector's built-in interactive toolbar
Computer2
HDMI
on the camera image.
If the document camera has USB and VGA connectors, you can connect a USB cable from
the camera to the computer and a VGA cable directly to the projector. This will provide two
ways of connecting. The USB connection can be used when the computer is on, and the VGA
connection can be used when the teacher wants to work with the document camera without
turning on the computer.

Using a Switch Box

You can use a switch box or control box to connect various video inputs to the projector.
However, the primary computer should always be connected directly to the projector with a
USB cable for interactivity and another cable for video output (VGA, HDMI, or Ethernet).
This allows maximum interactivity and dual pen support (using Easy Interactive Tools
software) for the computer. The projector's built-in toolbar will be available for images from
equipment connected through the switch box.
4