Cisco 7942G - Unified IP Phone VoIP 사용자 설명서 - 페이지 8

{카테고리_이름} Cisco 7942G - Unified IP Phone VoIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7942G - Unified IP Phone VoIP 17 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7942G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (16 페이지), 매뉴얼 (11 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지), 문제 해결 및 유지 관리 (27 페이지)

Cloud Voice Service

Call Management Features

4.1

When you put a call on hold, the call remains active even though you and the other

party cannot hear each other. You can answer or place another call while a call is

being on hold.

1. During a call, press the Hold soft key.

2. To return to the call, press the Resume soft key.

4.2

If you are enabled with call waiting for your phone, you will hear a call waiting tone

and the caller ID information will be shown on the phone's LCD screen if a new call

comes in when you are on the phone.

1. To answer the new call, press the Answer soft key. When you do so, the

original call will be put on hold.

To return to the original call, press the Hold button.

If the second call is still active, the call will be put on hold when you return to the

original call.

You can continue to use the Hold button to switch between the calls.

4.3

1. To transfer a call to another phone, press the Transfer

soft key.

2. Dial the number to which you are transferring the call.

3. When you hear the ringing tone, press Transfer again

or, when the party answers, announce the call and

press Transfer.

4. Hang up to end your participation in the call.

4.4

1. Lift up the Handset and press the Redial soft key.

Note: You can also press the Redial soft key to place the call via Speakerphone

Version 1.0