Cisco 7942G - Unified IP Phone VoIP 관리 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 7942G - Unified IP Phone VoIP에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7942G - Unified IP Phone VoIP 16 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7942G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (16 페이지), 매뉴얼 (11 페이지), 사용자 설명서 (6 페이지), 문제 해결 및 유지 관리 (27 페이지)

Cisco Unified IP Phones Installation

See the following figure for a graphical overview of the phone parts.

Figure 3: Parts Used to Wall Mount the Cisco Unified IP Phone

Before You Begin

To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from

the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which

the handset catches when the phone is vertical. For an illustrated procedure, see Installing the Wall Mount

Kit for the Cisco Unified IP Phone at:

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html

Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.

Caution

Procedure

Step 1

Push in the footstand adjustment button.

Step 2

Adjust the footstand, so it is flat against the back of the phone.

Step 3

Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand.

The keyholes fit standard phone jack mounts.

Step 4

Hang the phone on the wall.

Footstand adjustment button: Raises and lowers adjustment plate

Wall mounting screw holes

Adjustment plate: Raises and lowers phone vertically

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Mount Phone on Wall

Communications Manager 9.0 (SCCP and SIP)